null
Acudor

Acudor 60 x 60 Equipment Access Roof Hatch A6868 Aluminum - Double Leaf

SKU:
A6868
SHIPPING:
Usually arrives in 5-6 weeks
$6,795.00

Description

 

Acudor Equipment Access Roof Hatch Aluminum - Double Leaf

Acudor Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are required. This opening allows for equipment to be installed or removed from a building through the roof.

RHA Features

  • Weather tight construction
  • Convenient one-hand operation
  • 12" high insulated curb
  • Supports 40lbs./sq. ft. live load

RHA Optional Features

  • Painted and Anodized finishes
  • Galvanized steel curb and Aluminum cover
  • Polycarbonate domes for daylighting
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • Higher curb heights for "green roof" applications

RHA Standard Sizes

 
CURB ID L&W
WEIGHT PER HATCH
MODEL
inches (mm)
lbs. (kg.)
A6868
60 x 60 (1524 x 1524)
180 (82)
 

Specifications

Specifications

Cover
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 11 gauge aluminum with a 20 gauge aluminum inside liner.
Curb
1/8" thick aluminum with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge Pin
Heavy duty Aluminum pintle hinges with 3/8" pin
Opening
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish
Mill finish.
View AllClose