Acudor 48 x 48 Equipment Access Roof Hatch G5656 Galvanized - Single Leaf

SKU:
G5656
SHIPPING:
Usually arrives in 7-10 days
$1,850.00

Description

 

Acudor Equipment Access Roof Hatch Galvanized - Single Leaf

Acudor Equipment Access Roof Hatches are designed to provide convenient, economical access to the roof of a building where larger openings are required. This opening allows for equipment to be installed or removed from a building through the roof.

RHG Features

  • Weather tight construction
  • Convenient one-hand operation
  • 12" high insulated curb
  • Supports 40lbs./sq. ft. live load

RHG Optional Features

  • Stainless Steel cover, curb, and/or hardware (RHG)
  • Polycarbonate domes for daylighting
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • Higher curb heights for "green roof" applications

RHG Standard Sizes

 
CURB ID L&W
WEIGHT PER HATCH
MODEL
inches (mm)
lbs. (kg.)
G5656
48 x 48 (1220 x 1220)
185 (84)
 

Specifications

Specifications

Cover
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft., the cover is 14 gauge galvanized steel with a 22 gauge galvanized steel inside liner.
Curb
14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge
Heavy duty galvanized steel pintle hinges with 3/8" pin
Opening
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish
Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel paint.
View AllClose