Description
Smart EV Charger Solar boost kit, Enables HD-Wave inverters to couple with stand alone EV charger, SE-EV-KIT-V3UPG-01
(Image shows EV Charging unit - this item is the Solar Boost Kit ONLY) Use the SolarEdge Smart EV Charger Boost kit to add terminal blocks to any HD wave series SolarEdge inverter. These terminals allow the Smart EV Charger to attach to the inverter for optimized EV charging performance, even on a sub-50 amp breaker.
Features
- Highlights - Wi-Fi enabled, level 2 charging station, with up to 40A (9.6kW) charging power. Full charging control, including remote activation, smart scheduling, and LED charging status. Industry-leading 5-year warranty. Rated for indoor or outdoor use. Plug-in unit, easily modified to support hardwired installations. Suitable for use with or without a SolarEdge PV system.
- Optimized Charging - Charges EV with 100% renewable energy by using excess-solar mode. Synchronizes with the full SolarEdge ecosystem (PV, StorEdge, and smart home devices), all managed by a single mobile app. Ideal in cases where the inverter is located far from the vehicle.
Specifications
-
Manufacturer: SolarEdge
Product Line: EV Charger
Model ID: SE-EV-KIT-V3UPG-01 -
Mechanical Data
Technology: EV Charging Kit
EV Charger Connector Dimensions: 12 x 7.3 x 6 Inches
EV Charger Weight: 6.3 lbs
EV Charger Cable Length: 25 ft
EV Charge Cable Weight: 12.5 lbs
EV Charger Specifications
Charging Mode: AC Level 2
Rated AC Power Output: 9.6 kW
Max. Continuous Output Current: 40AAC @240VAC
Nominal AC Output Voltage: 240 VAC
Nominal AC Frequency: 60 Hz
Ground Fault Detection Threshold: 5 mA
Supported Communication Interfaces: Wi-Fi (built-in antenna included), Ethernet, RS485 and Cellular (optional)
Features with SolarEdge Inverter: Smart Energy Management: Controlled excess solar charging
Additional Features
EV Charger Status LEDs, Fault Indicator Yes
EV Charger Unplugging Detection: Yes, current termination according to SAE J1772
EV Charger Ground Connection Monitoring: Yes, continuous
EV Charger Configuration: Installer commissioning via SetApp. Homeowner configuration controls and monitoring via mySolarEdge app.
INFO & GUIDE