Outback Power Flexmax FM80-150VDC Mppt Charge Controller

SKU:
FM80-150VDC
SHIPPING:
Free Shipping (Arrives in 3-5 Days)
$469.00

Description

Three Reasons to Choose the FLEXmax 60/80 Charge Controllers from OutBack Power:
1. DESIGNED FOR PERFORMANCE
  • The de facto standard in the industry, from the originators of the multiple voltage MPPT charge controller and the first choice for system design professionals
  • Innovative FLEXmax MPPT software algorithm is both continuous and active; increases PV array output by up to 30%
  • Lower PV array voltage means maximum resistance from shading versus higher voltage controllers
  • Full power output in ambient temperature up to 104°F (40°C)
  • Battery voltages from 12 to 60VDC
  • Greater than 98% peak efficiency; less than 1W self-consumption
2. ENGINEERED FOR RELIABILITY
  • Extensive quality and reliability testing, including Highly Accelerated Life Testing (HALT)
  • 15 years of experience manufacturing products for fault intolerant, mission-critical applications
  • Standard 5 year warranty (extended 10 year warranty available)
3. EASY-TO-INSTALL, MONITOR AND CONTROL
  • System configures quickly with smart programming wizards (MATE3 required)
  • Built in 4 line 80-character display for easy programming with no other equipment required
  • Monitor, command and control from any internet-connected device with OPTICS RE
  • Fully OutBack network integrated and programmable
  • Programmable auxiliary control output for smart load controls
  • Built-in 128 days of data logging
  • Global technical support
Product Highlights
  • Maximum Power Point Tracking (MPPT)
  • Active cooling and intelligent thermal management cooling
  • Ambient temperatures as high as 104°F (40°C)
  • Built-in, backlit 80 character display
  • Integrated OutBack network communications

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).

Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration.

FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

Specifications

Specifications

Models*:FLEXmax 80 (FM80-150VDC)
Nominal Battery Voltages 12, 24, 36, 48, or 60VDC (Single model, selectable via field programming at start-up)
Maximum Output Current 80A @ 104°F (40°C) with adjustable current limit
NEC Recommended Solar
Maximum Array STC Nameplate
12VDC systems: 1000W / 24VDC systems: 2000W
48VDC systems: 4000W / 60VDC systems: 5000W
PV Open Circuit Voltage (VOC) 150VDC absolute maximum coldest conditions / 145VDC start-up and operating maximum
Standby Power Consumption Less than 1W typical
Power Conversion Efficiency 97.5% @ 80ADC in a 48VDC System (typical)
Peak Efficiency 60VDC input w/48V battery at 53.1VDC (98.44%)
Charging Regulation Bulk, absorption, float, silent and equalization
Voltage Regulation Set points 13 to 80VDC user adjustable with password protection
Equalization Charging Programmable voltage setpoint and duration, automatic termination when completed
Battery Temperature Compensation Automatic with optional RTS installed / 5.0mV per °C per 2V battery cell
Voltage Step-Down Capability Down convert from any acceptable array voltage to any battery voltage. Example: 72VDC array to 24VDC battery; 60VDC array to 48VDC battery
Programmable Auxiliary Control Output 12VDC output signal which can be programmed for different control applications (maximum of 0.2ADC)
Status Display 3.1” (8 cm) backlit LCD screen, 4 lines with 80 alphanumeric characters total 3.1” (8 cm) backlit
Remote Display and Controller Optional MATE3, MATE or MATE2
Network Cabling Proprietary network system using RJ-45 modular connectors with CAT5 cable (8 wires)
Data Logging Last 128 days of operation: amp-hours, watt-hours, time in float, peak watts, amps, solar array voltage, maximum battery voltage, min. battery voltage and absorb time, accumulated amp-hours,and kWh of production
Operating Temperature Range -40 to 60°C (power automatically derated above 40°C)
Environmental Rating Indoor Type 1
Conduit Knockouts One 1” (25.4mm) on the back; One 1” (25.4mm) on the left side; Two 1” (25.4mm) on the bottom
Warranty Standard 5-year / Available 10-year
Weight (lb/kg) Unit: 12.20 / 5.53
Shipping: 15.5 / 7
Dimensions H x W x D (in/cm) Unit: 16.25 x 5.75 x 4.5 / 41.3 x 14.6 x 11.4
Shipping: 19 x 9.5 x 8.5 / 48.3 x 24.1 x 21.6
Options Remote Temperature Sensor (RTS), HUB4, HUB10.3, MATE, MATE2, MATE3
Menu Languages English & Spanish
Certifications ETL Listed to UL1741, CSA C22.2 No. 107.1
View AllClose