Description

Enphase 235W-350W+ Micro Inverter

Enphase, IQ 7 Micro Inverter, compatible with 60-cell PV modules (only), 208/240 volt, 250VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7-60-2-US

The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro achieve the highest system efficiency.

Part of the Enphase IQ System, the IQ 7 and IQ 7+ Micro integrate seamlessly with the Enphase Envoy-S, and the Enphase Enlighten monitoring
and analysis software.

The IQ 7 and IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty.

Features

Easy to Install - Lightweight and simple. Faster installation with improved, lighter two-wire cabling.
Productive and Reliable - Optimized for high powered 60-cell modules. More than a million hours of testing. Class II double-insulated enclosure.
Smart Grid Ready - Complies with advanced grid support, voltage and frequency ride-through requirements. Remotely updates to respond to changing grid requirements. Configurable for varying grid profiles.

Specifications

GENERAL INFORMATION
Product Line: IQ7 Series
Model ID: IQ7-60-2-USs
Certifications and Safety Ratings:

MECHANICAL DATA
Technology: Micro-Inverter
Dimensions: 8.34 x 6.89 x 1.19 Inches
Weight: 2.38 lbs
Connector Type: MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter)
Cooling: Natural convection - No Fans
Approved for Wet Locations: Yes
Pollution Degree: PD3
Enclosure: Class II Double-Insulated
Environmental Category / UV Exposure Rating: Outdoor - IP67
Communication: Power Line Communication (PLC)
Compliance (Pending): AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62019-1, IEC/EN 62109-2
Ambient Temperature Range: -40°C to +65°C
Relative Humidity Range: 4% to 100% (Condensing)

ELECTRICAL DATA
Input Data
Commonly Used Module Pairings:235W to 350W+
Module Compatibility:60-Cell PV Modules
Maximum Input DC Voltage:48 Volts
Peak Power Tracking Voltage:27V-37 Volts
Operating Range:16V-48 Volts
Min / Max Start Voltage:22 V / 48 Volts
Max DC Short Circuit Current (Module Isc):15 Amps
Overvoltage Class DC Port:II
DC Port Backfeed Under Single Fault:0 Amps
PV Array Configuration:AC Side Protection Requires Max 20A per Branch Circuit

Output Data (AC)
Peak Output Power: 250 VA
Maximum Continuous Output Power: 240 VA
Nominal Voltage / Range: 240V / 211-264V
Nominal Output Current: 1.04 Amps
Nominal Frequency: 60 Hz
Extended Frequency Range: 49-68 Hz
Maximum Units per 20 A (L-N) Branch Circuit: 16 (230 VAC)
Overvoltage Class AC Port: III
AC Port Backfeed Current: 18 Amps
Power Factor Setting: 1.0
Power Factor (Adjustable): 0.7 Leading ... 0.7 Lagging
Efficiency: 96.5%