Enphase IQ7PLUS-72-2-US 235W-440W+ Micro Inverter
- In Stock. Free Shipping! (Estimated delivery 5-10 working days)
Enphase 235W-440W+ Micro Inverter
Enphase, IQ 7+ Micro Inverter, compatible with 60, 72 and 96-cell PV, modules, 208/240 volt, 295VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7PLUS-72-2-US
The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro achieve the highest system efficiency.
Part of the Enphase IQ System, the IQ 7 and IQ 7+ Micro integrate seamlessly with the Enphase Envoy-S, and the Enphase Enlighten monitoring
and analysis software.
The IQ 7 and IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty.
- Easy to Install - Lightweight and simple. Faster installation with improved, lighter two-wire cabling.
- Productive and Reliable - Optimized for high powered 60-cell, 72-cell and 96-cell modules. More than a million hours of testing. Class II double-insulated enclosure.
- Smart Grid Ready - Complies with advanced grid support, voltage and frequency ride-through requirements. Remotely updates to respond to changing grid requirements. Configurable for varying grid profiles.
|Product Line: IQ7 Series|
|Model ID: IQ7PLUS-72-2-US|
|Certifications and Safety Ratings:|
|Dimensions: 8.34 x 6.89 x 1.19 Inches|
|Weight: 2.38 lbs|
|Connector Type: MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter)|
|Cooling: Natural convection - No Fans|
|Approved for Wet Locations: Yes|
|Pollution Degree: PD3|
|Enclosure: Class II Double-Insulated|
|Environmental Category / UV Exposure Rating: Outdoor - IP67|
|Communication: Power Line Communication (PLC)|
|Compliance (Pending): AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62019-1, IEC/EN 62109-2|
|Ambient Temperature Range: -40°C to +65°C|
|Relative Humidity Range: 4% to 100% (Condensing)|
|Commonly Used Module Pairings:235W to 440W+|
|Module Compatibility:60-Cell and 72-Cell PV Modules|
|Maximum Input DC Voltage:60 Volts|
|Peak Power Tracking Voltage:27V-45 Volts|
|Operating Range:16V-60 Volts|
|Min / Max Start Voltage:22 V / 60 Volts|
|Max DC Short Circuit Current (Module Isc):15 Amps|
|Overvoltage Class DC Port:II|
|DC Port Backfeed Under Single Fault:0 Amps|
|PV Array Configuration:AC Side Protection Requires Max 20A per Branch Circuit|
|Output Data (AC)|
|Peak Output Power: 295 VA|
|Maximum Continuous Output Power: 290 VA|
|Nominal Voltage / Range: 230V / 184-276V|
|Nominal Output Current: 1.26 Amps|
|Nominal Frequency: 50 Hz|
|Extended Frequency Range: 45-55 Hz|
|Maximum Units per 20 A (L-N) Branch Circuit: 13 (230 VAC)|
|Overvoltage Class AC Port: III|
|AC Port Backfeed Current: 0 Amps|
|Power Factor Setting: 1.0|
|Power Factor (Adjustable): 0.7 Leading ... 0.7 Lagging|