Select Page
Sale!
b_7a1b8cdbd5312d07526318e3c709c594MX-80MPPTB

Flex Max 80 MPPT Charge Controller

$849.00 $699.00

 

  • Model Number:   FlexMax80
  • Brand:  Outback
  • Usually ships within 1 – 3 days

 

10 in stock

SKU: SPEE-0490 Category:

Product Description

Summary

The FLEXmax 80 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The FLEXmax 80’s innovative MPPT algorithm is both continuous and active, increasing your renewable energy yield up to 30%. Thanks to enhanced cooling, the FLEXmax 80 can operate at its full 80 amp maximum current rating in ambient temperatures as high as 104°F (40°C).

Description

The FLEXmax 80 is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Systems. The FLEXmax 80’s innovative MPPT algorithm is both continuous and active, increasing your renewable energy yield up to 30%. Thanks to enhanced cooling, the FLEXmax 80 can operate at its full 80 amp maximum current rating in ambient temperatures as high as 104°F (40°C).

Included in the FLEXmax 80 are all of the features first developed by OutBack Power in the revolutionary MX60, such as support for a wide range of nominal battery voltages and the ability to step-down a high voltage solar array to recharge a low voltage battery. A built-in backlit display shows status information at the touch of a button. Enhanced network communications allow the FLEXmax 80 to be remotely programmed via the optional MATE system display and controller.
The new FLEXmax 80 is the only choice when you demand a high performance, efficient and customizable charge controller for your advanced power system

 

Related Documents:

Additional Information

Weight 14.0 lbs
Dimensions 18.0 x 11.0 x 8.0 in
Current (amps)

80

Volts

12/24/48/60

Rating

Nominal Battery Voltages 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up).

Maximum Solar Array STC Nameplate FLEXmax 80 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC Systems 6250 Watts.

NEC Recommended Solar Array STC Nameplate FLEXmax 80 12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts.

PV Open Circuit Voltage (VOC) 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum.

Standby Power Consumption Less than 1 Watt typical.

Power Conversion Efficiency – Typical FLEXmax Charging Regulation Five Stages: Bulk, Absorption, Float, Silent and Equalization.

Equalization Charging Programmable Voltage Setpoint and Duration – Automatic Termination when completed.

Battery Temperature Compensation Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell

Charge

Voltage Step-Down Capability Can charge a lower voltage battery from a higher voltage PV array – Max 150 VDC input.

Programmable Auxilary Control Output 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC).

Status Display 3.1″ (8 cm) backlit LCD screen – 4 lines with 80 alphanumeric characters total.

Remote Display and Controller Optional Mate or Mate2 with RS232 Serial Communications Port

Cabling

Network Cabling Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires).

Data Logging Last 128 days of Operation – Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage.

Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production.

Hydro Turbine Applications Consult factory for approved Turbines.

Positive Ground Applications Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 cannot be used in positive ground applications)

Temperature

Operating Temperature Range Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C)

Other

Environmental Rating Indoor Type 1 (IP 30).

Conduit Knockouts One 1″ (35mm)on the back; One 1″ (35mm) on the left side; Two 1″ (35mm) on the bottom

Reviews

There are no reviews yet.

Be the first to review “Flex Max 80 MPPT Charge Controller”

Your email address will not be published. Required fields are marked *

Tell a Friend

From:
Enter up to 3 email addresses for your friends:
Friend-1:
Friend-2:
Friend-3:
Subject:
Text:
X
Tell a friend